温州百辉机械开放式水砂混合喷砂机

工作原理How it work

砂水混合压入式喷砂机是将水、磨料存储在沙罐内，压缩空气调压阀及气阀开关进入砂罐，使密闭砂罐形成压力。打开控制喷的开关水、磨料、压缩空气经底部吹气阀进入罐体使水喷砂混合磨液更均匀的通过出砂阀进入砂罐，然后由喷嘴高速喷出，，射出加工表面。

   调节砂量调节扳手可改变出砂量大小。砂罐中磨料用完后，关闭手拉阀开关，关闭气阀开关，打开砂阀上的paiqi压缩空尽后，重新加水、加磨料循环使用。

Sand-water mixed pressure sandblasting machine is water, abrasive stored in the sand tank, Compressed air pressure valve and air valve switch into the sand tank, closed sand tank to form pressure. Turn on the water, abrasive and Compressed air that control the spray gun and enter the tank through the bottom blowing valve to make the water-sand mixed grinding fluid more evenly enter the sand tank through the sand discharge valve, and then shoot out from the nozzles at high speed to shoot out the processed surface. Adjust the amount of sand adjustment wrench can change the amount of sand. When the abrasive in the sand tank has been used up, close the hand-held valve, close the air valve and open the exhaust valve on the sand valve. After the Compressed air in the tank has been drained, re-fill the tank with water and add the abrasive for recycling.

主要参数Main parameters